Configuring the Best Impedance Level
After you have run the test, you can configure the FXO channel with the best impedance value obtained from the test result.
|
➢
|
To configure the FXO channel with best impedance value: |
|
1.
|
Access the device's Command Shell. |
|
2.
|
On the command-line prompt, enter the following command: |
/VoiceEngn/AnalogLineTest>AnalogLineTestConfigureImpedance
In our example, where the impedance test of FXO channel 4 resulted in the best ERL (25.66) for 0 to 600 Ohms, the command automatically configures the channel with this ERL:
/VoiceEngn/AnalogLineTest>AnalogLineTestConfigureImpedance
Best ERL (25.66) was measured with impedance 0. Channel 4 configured with this impedance